Aggregator

Log Number: 4510833Logbook(s): 

• ELOG

Body: 

Laser Used:

C Laser

Sigmas:

Peak 1 - x Sigma: 0.1069 Peak 2 - u Sigma: 0.0748 Peak 3 - y Sigma: 0.1824

Log Number: 4510832Logbook(s): 

• ELOG

Body: 

HYST AREA Version 7-0 has successfully cycled the following:

Area.Linacs.North

Total Time: 3.033 mins

Log Number: 4510831Logbook(s): 

• ELOG
• CLOG

Tags: 

• Autolog

Body: LEM 9.19.5 was successfully run for the North Linac on 2026-06-11 19:44:27. The application phase took 00:00:16 to complete.

Log Number: 4510830Logbook(s): 

• ELOG
• RFLOG

Tags: 

• Autolog

Body: 

The OPS DRVHs for the following cavities have been updated:
1L23-1
Username: bschauml
Date/Time: 06-11-26_19:43:52
RF Status: Good
Tuner Status: Good
Comment: DRVH=11.300 Quenching
Previous OPS DRVH: 11.5
Special Instructions: Faults evenly spaced

Log Number: 4510829Logbook(s): 

• ELOG

Body: IDDescriptionPeriodCause 17170Title:
Multiple trim cards in 3 different adjacent racks mismatched

Summary:
Racks NL01B02 and NL01B03 and NL01B04Duration:
9 minutes

Time Down:
11-Jun-2026 19:33

Log Number: 4510828Logbook(s): 

• DCLOG
• ELOG

Entry Makers: eformanBody: 

Racks NL01B02 and NL01B03 and NL01B04. Operator reports that the building is not unusually hot.
Unable to force setpoint.

Log Number: 4510827Logbook(s): 

• ELOG

Body: IDDescriptionPeriodCause 17170Title:
Multiple trim cards in 3 different adjacent racks mismatched

Summary:
Racks NL01B02 and NL01B03 and NL01B04Duration:
51 seconds

Time Down:
11-Jun-2026 19:33

Log Number: 4510826Logbook(s): 

• DCLOG
• ELOG

Entry Makers: yoonBody: 

swapped trim card

Log Number: 4510825Logbook(s): 

• ELOG

Entry Makers: bschaumlBody: 

Neither will take setpoint. I will run out to reseat/swap them.

Log Number: 4510824Logbook(s): 

• ELOG

Body: 

HYST AREA Version 7-0 has successfully cycled the following:

Area.Linacs.North
Area.Linacs.South
Area.Arcs.Arc1.Spreader
Area.Arcs.Arc1.Arc
Area.Arcs.Arc1.Recombiner
Area.Arcs.Arc1.Extraction
Area.Arcs.Arc2.Spreader
Area.Arcs.Arc2.Arc
Area.Arcs.Arc2.Recombiner
Area.Arcs.Arc2.Extraction
Area.Arcs.Arc3.Spreader
Area.Arcs.Arc3.Arc
Area.Arcs.Arc3.Recombiner
Area.Arcs.Arc3.Extraction
Area.Arcs.Arc4.Spreader
Area.Arcs.Arc4.Arc
Area.Arcs.Arc4.Recombiner
Area.Arcs.Arc4.Extraction

Log Number: 4510823Logbook(s): 

• ELOG

Tags: 

• Autolog

Body: 

The following box supplies were CYCLED by version 2-16 of the Box Supply Cycling Script:
ARC1A Ramp Rate = 4.196 A/s
ARC2A Ramp Rate = 6.808 A/s
ARC3A Ramp Rate = 9.725 A/s
ARC4A Ramp Rate = 11.344 A/s
ARC5A Ramp Rate = 9.961 A/s
ARC6A Ramp Rate = 9.235 A/s
ARC7A Ramp Rate = 9.981 A/s
ARC8A Ramp Rate = 11.974 A/s
ARC9A Ramp Rate = 9.380 A/s
ARCAA Ramp Rate = 12.276 A/s
LAM1C Ramp Rate = 8.295 A/s
LAM3C Ramp Rate = 10.061 A/s
RSEP8A Ramp Rate = 10.612 A/s
RSEP9A Ramp Rate = 5.026 A/s

Log Number: 4510822Logbook(s): 

• ELOG

Body: 

HYST AREA Version 7-0 has successfully cycled the following:

Area.Linacs.North

Total Time: 3.017 mins

Log Number: 4510821Logbook(s): 

• ELOG
• CLOG

Tags: 

• Autolog

Body: LEM 9.19.5 was successfully run for the North Linac on 2026-06-11 19:09:52. The application phase took 00:00:21 to complete.

Log Number: 4510820Logbook(s): 

• ELOG

Tags: 

• Autolog

Body: 

The following box supplies were TURNED ON AT SET POINT 1 by version 2-16 of the Box Supply Cycling Script:
ARC1A Ramp Rate = 7.954 A/s
ARC2A Ramp Rate = 6.939 A/s
ARC3A Ramp Rate = 9.377 A/s
ARC4A Ramp Rate = 10.989 A/s
ARC5A Ramp Rate = 9.739 A/s
ARC6A Ramp Rate = 9.235 A/s
ARC7A Ramp Rate = 9.981 A/s
ARC8A Ramp Rate = 11.974 A/s
ARC9A Ramp Rate = 9.216 A/s
ARCAA Ramp Rate = 12.276 A/s
DOG1E Ramp Rate = 4.178 A/s
DOG2E Ramp Rate N/A
DOG3E Ramp Rate N/A
DOG4E Ramp Rate N/A
DOG5E Ramp Rate N/A
DOG6E Ramp Rate N/A
DOG7E Ramp Rate N/A
DOG8E Ramp Rate N/A
DOG9E Ramp Rate

Log Number: 4510819Logbook(s): 

• ELOG

Body: IDDescriptionPeriodCause 17166Title:
1L21-4 OLT

Summary:
Cavity was repeatedly opening the RF switch while attempting an OLT. RF on-call attempted to resolve it remotely but, after some troubleshooting, the zone would not recover HV.

Log Number: 4510818Logbook(s): 

• ELOG

Body: IDDescriptionPeriodCause 17169Title:
Building 40 (W4) temperature exceeds 88 F

Summary:
Building 40 (W4) temperature exceeds 88 F DT started at 15:49, but unable to add retroactively without throwing an error in softwareDuration:

Log Number: 4510817Logbook(s): 

• ELOG

Body: IDDescriptionPeriodCause 17168Title:
Building 39 (E2) temperature exceeds 88 F

Summary:
Building 39 (E2) temperature exceeds 88 F.

Log Number: 4510815Logbook(s): 

• ELOG

Body: IDDescriptionPeriodCause 17169Title:
Building 40 (W4) temperature exceeds 88 F

Summary:
Building 40 (W4) temperature exceeds 88 F DT started at 15:49, but unable to add retroactively without throwing an error in softwareDuration:

Log Number: 4510816Logbook(s): 

• ELOG

Entry Makers: kernsBody: 

Dropped zone to null after several attempts to turn cav4 on with instant drop back once in HV. Reset after reboot of cav 4 but zone wouldn't even attempt to go into HV after all back into filaments. Noticed that filaments were all low after complete filament counts. Came onsite and didn't see anything at all so I cycled the CPS a/c overcurrent and control power and successfully got zone back into HV and RF. Restored Cav 4 to ODVH= 8.9 Mv/m. Checked out cav. 7 and it does have low drive out but will have to check RFCM out before I can say it's a 2.5w amp. Handing back to OPS.

Log Number: 4510814Logbook(s): 

• ELOG

Body: IDDescriptionPeriodCause 17168Title:
Building 39 (E2) temperature exceeds 88 F

Summary:
Building 39 (E2) temperature exceeds 88 FDuration:
1 hour 34 minutes

Time Down:
11-Jun-2026 17:22

Time U