Aggregator

Log Number: 4304441Logbook(s): 

• ELOG

Body: 

HYST AREA Version 6-4-1 has successfully cycled the following:

Area.Transport.2T
Area.Transport.4T
Area.Transport.6T
Area.Transport.8T
Area.Transport.AT

Total Time: 6.233 mins

Log Number: 4304438Logbook(s): 

• ELOG

Tags: 

• Autolog

Body: 

The following box supplies were CYCLED by version 2-16 of the Box Supply Cycling Script:
XSEP2T Ramp Rate = 5.735 A/s
XSEP4T Ramp Rate = 5.406 A/s
XSEP6T Ramp Rate = 5.045 A/s
XSEP8T Ramp Rate = 17.787 A/s
XSEPAT Ramp Rate = 16.812 A/s

Log Number: 4304422Logbook(s): 

• ELOG

Body: Results where Job # is 864 {4} CAVITY PHASE ERROR (DEGREES) OUTCOME PHASE (DEGREES) START DATE DURATION (SECONDS) CORRECTION DATE CORRECTION ERROR REASON 2L02-7 3.01 CORRECTED -77.70 14-May-2024 12:09 58</t

Log Number: 4304421Logbook(s): 

• ELOG
• POLOG

Body: 

Anticipated Schedule:

The Degrader vacuum work will begin when the gun vacuum work is ending.

The anticipated installation date for the girder is the week of June 17, subject to many tasks occurring beforehand.
Prior to this date, the following tasks should be complete
1) corrector and helicity magnet powered down and disconnected
2) beamline valves closes, ion pumps de-energized
3) gun group will vent beamline and remove beampipe prior to girder installation

Log Number: 4304420Logbook(s): 

• ELOG

Body: 

associated AtLis entries from other groups working on Degrader Beamline project

https://tasklists.jlab.org/atlis/tasks/112023 Cable installations - Keith Cole
https://tasklists.jlab.org/atlis/tasks/111960 Survey and Alignment - Steve Hardisty
https://tasklists.jlab.org/atlis/tasks/111288 Flowmeters - Joseph Sawyer
https://tasklists.jlab.org/atlis/tasks/110503 Installation work - Neil Wilson
https://tasklists.jlab.org/atlis/tasks/111115 Viewer - Tony Dela Cruz (for 5D line viewers, Degrader viewer at the same time)

Log Number: 4304418Logbook(s): 

• ELOG
• BTLOG

Tags: 

• Autolog

Body: dogCalc V0-13 download

hostname: opsl03
CED workspace: OPS
CED login_key: pro

Log Number: 4304414Logbook(s): 

• ELOG

Body: 

HYST AREA Version 6-4-1 has successfully cycled the following:

Area.Linacs.South

Total Time: 3.150 mins

Log Number: 4304410Logbook(s): 

• ELOG
• RFLOG

Tags: 

• Autolog

Body: 

The OPS DRVHs for the following cavities have been updated:
2L02-5
Username: mock
Date/Time: 05-14-24_11:45:40
RF Status: Good
Tuner Status: Good
Comment: DRVH=5.400 Quench faults at 5.5
Previous OPS DRVH: 0
Special Instructions:

Log Number: 4304409Logbook(s): 

• ELOG
• CLOG

Tags: 

• Autolog

Body: LEM 9.17 was successfully run for the South Linac on 2024-05-14 11:43:59. The application phase took 00:00:39 to complete.

Log Number: 4304408Logbook(s): 

• ELOG
• RFLOG

Tags: 

• Autolog

Body: 

The following cavity histories have been updated:
2L02-8
Username: mock
Date/Time: 05-14-24_11:41:52
RF Status: Bad
Tuner Status: Good
Comment: Bypassed by AES-RF. Throwing faults going into HV.
Special Instructions:

Log Number: 4304407Logbook(s): 

• ELOG
• RFLOG

Tags: 

• Autolog

Body: 

The following cavity histories have been updated:
2L02-6
Username: tdavis
Date/Time: 05-14-24_11:41:22
RF Status: Bad
Tuner Status: Good
Comment: When bringing into filaments the cavity keeps tripping on a KBCU fault. Will troubleshoot at next opportunity.
Special Instructions:

Log Number: 4304404Logbook(s): 

• ELOG
• RFLOG

Tags: 

• Autolog

Body: 

The following cavity histories have been updated:
2L02-3
Username: tdavis
Date/Time: 05-14-24_11:40:24
RF Status: Bad
Tuner Status: Good
Comment: The Mod Anode Current Monitoring Chassis for cavity #3 is bad and keeps reporting a KMAI of 10ma. Will replace when a spare is available.
Special Instructions:

Log Number: 4304403Logbook(s): 

• ELOG
• RFLOG

Tags: 

• Autolog

Body: 

The following cavity histories have been updated:
2L02-1
Username: tdavis
Date/Time: 05-14-24_11:39:31
RF Status: Good
Tuner Status: Good
Comment: Replaced the 2.5w amp and recovered the cavities into RF. (Did not replace the AIB for cavities 1-4)
Special Instructions:

Log Number: 4304402Logbook(s): 

• ELOG
• RFLOG

Tags: 

• Autolog

Body: 

The following cavity histories have been updated:
2L02-7
Username: tdavis
Date/Time: 05-14-24_11:38:33
RF Status: Good
Tuner Status: Good
Comment: Replaced the AIB and recovered the cavities into RF.
Special Instructions:

Log Number: 4304401Logbook(s): 

• ELOG
• RFLOG

Tags: 

• Autolog

Body: 

The following cavity histories have been updated:
2L02-5
Username: tdavis
Date/Time: 05-14-24_11:38:33
RF Status: Good
Tuner Status: Good
Comment: Replaced the AIB and recovered the cavities into RF.
Special Instructions:

Log Number: 4304400Logbook(s): 

• ELOG
• RFLOG

Tags: 

• Autolog

Body: 

The following cavity histories have been updated:
2L02-1
Username: tdavis
Date/Time: 05-14-24_11:38:33
RF Status: Good
Tuner Status: Good
Comment: Replaced the AIB and recovered the cavities into RF.
Special Instructions:

Log Number: 4304399Logbook(s): 

• ELOG
• RFLOG

Tags: 

• Autolog

Body: 

The following cavity histories have been updated:
2L02-1
Username: tdavis
Date/Time: 05-14-24_11:38:02
RF Status: Good
Tuner Status: Good
Comment: Replaced the 2.5w amp and recovered the cavity into RF.
Special Instructions:

Log Number: 4304398Logbook(s): 

• ELOG

Tags: 

• Autolog

Body: System Masking for: BeamLossMonitor
User: mock
Areas: All

BeamLossMonitor Devices:
ILM0I07
ILM0L01A
ILM0L01B
ILM0L02
ILM2D00A
ILM2D00B
ILM0L04A
ILM0L04B
ILM0L05
ILM0L06A
ILM0L08
ILM0R01
ILM4D00
ILM0R03
ILM0R04
ILM0R06
ILM0R08
ILM0R09
ILM1L01
ILM1L02
ILM6R08
ILM3S00
ILM7S00
ILM9S00
ILM5S10
ILM5E03
ILM7S01
ILM9A01
ILM3E02
ILM5A01
ILM1A04
ILM1A06
ILM1A09
ILM5A10
ILM1A16
ILM1A19
ILM3R10
ILM9R07
ILM1R09
ILM2L03
ILM5R10
ILM5R05
ILM2L01
ILM2T09
ILM8T09<B

Log Number: 4304381Logbook(s): 

• BTLOG
• ELOG

Body: 

I was able to grab a little more data in the SL. It is a little messier than last time. 2L02 was being worked on and 2L24 had an IOC update and reboot/quench fault. Otherwise, things went pretty smoothly.

Log Number: 4304379Logbook(s): 

• ELOG

Tags: 

• Autolog

Body: Destination Masking to: BSY
User: mock