Recent Log Entries

rayTrace Data Collection: MBT1S10H to IDA1R02 - C laser to 1R dumplette

Log Number: 3893128Logbook(s): Body: username = dturner, hostname = opsl03, CSUE version = dvl

Data collection parameters:
points_per_turn = 32
lattice_name = /cs/dvlhome/apps/r/rayTrace_12GeV/dvl/fileio/data/2021-08-16_10:33:38/MBT1S10H_IDA1R02
sddsmonitor_interval = 1.0
start_element = MBT1S10H
emit = 3.78654278783832E-10
filter_min = 0
num_turns = 3
condition_dwell = 2
fsd_pv = ISD0I011G
name = ARC1
end_pass = 1
launch_momentum = 1012.68946169621
corr2_momentum = 1012.68955847614
corr2_initial_bdl = -780
max_orbit = 3
corrector1 = MBT1S10H

COMMENT ON Clean and Assess Repair for ARC 3 Box Supply

Log Number: 3893127Logbook(s): Body: 

Further testing of parts found major anomalies between installed parts and expected internal design of transistor modules. Lessons learned applied to remove parts of similar makeup from remaining box supplies. Repairs on ARC3 will continue as time allows.

The "spare" box supply is being used as a replacement until parts are available.

PSH side IGBT's removed and some of them can be used in other power supplies until parts are available.

APPROVED Hall A CAMAC Power Supply Swap

Log Number: 3893124Logbook(s): Body: 

Task approved.

I can't recall where this crate is located, but I suspect it is in the Hall. If so, please contact the Work Coordinator for Hall A before going down there.

rayTrace Data Collection: MBT1S10H to IDA1R02 - 1L12-6 SOSing during the measurement - retaking

Log Number: 3893123Logbook(s): Body: username = dturner, hostname = opsl03, CSUE version = dvl

Data collection parameters:
points_per_turn = 32
lattice_name = /cs/dvlhome/apps/r/rayTrace_12GeV/dvl/fileio/data/2021-08-16_10:19:37/MBT1S10H_IDA1R02
sddsmonitor_interval = 1.0
start_element = MBT1S10H
emit = 3.78654278783832E-10
filter_min = 0
num_turns = 3
condition_dwell = 2
fsd_pv = ISD0I011G
name = ARC1
end_pass = 1
launch_momentum = 1012.68946169621
corr2_momentum = 1012.68955847614
corr2_initial_bdl = -780
max_orbit = 3
corrector1 = MBT1S10H

FSD Masking Tool: Successful System Masking for: BeamLossMonitor ***Some node's masks failed to write

Log Number: 3893119Logbook(s): Tags: Body: System Masking for: BeamLossMonitor
User: mmerz
Areas: All

BeamLossMonitor Devices:
ILM0I07
ILM0L01A
ILM0L01B
ILM0L02
ILM2D00A
ILM2D00B
ILM0L04A
ILM0L04B
ILM0L05
ILM0L06A
ILM0L08
ILM0R01
ILM4D00
ILM0R03
ILM0R04
ILM0R06
ILM0R08
ILM0R09
ILM1L01
ILM1L02
ILM6R08
ILM3S00
ILM7S00
ILM9S00
ILM5S10
ILM5E03
ILM7S01
ILM9A01
ILM3E02
ILM5A01
ILM1A04
ILM1A06
ILM3R10
ILM9R07
ILM1R09
ILM2L03
ILM5R10
ILM5R05
ILM2L01
ILM2T09
ILM8T09
ILM4C01
ILM4C02
ILM4C03
ILM1C01<

rayTrace Data Collection: ITV0L01 to SDL0R08 - remeasure with energy lock off this time

Log Number: 3893117Logbook(s): Body: username = dturner, hostname = opsl03, CSUE version = dvl

Data collection parameters:
points_per_turn = 32
lattice_name = /cs/dvlhome/apps/r/rayTrace_12GeV/dvl/fileio/data/2021-08-16_10:00:46/ITV0L01_SDL0R08
sddsmonitor_interval = 1.0
start_element = ITV0L01
emit = 5.702537524852556E-08
filter_min = 0
num_turns = 3
condition_dwell = 2
fsd_pv = ISD0I011G
name = ILD_x
end_pass = 1
launch_momentum = 6.72009126592131
corr2_momentum = 6.72009126592131
corr2_initial_bdl = -86
max_orbit = 1.5
corrector1 = MBH0L01V

rayTrace Data Collection: ITV0L01 to SDL0R08 - C laser to ILD

Log Number: 3893114Logbook(s): Body: username = dturner, hostname = opsl03, CSUE version = dvl

Data collection parameters:
points_per_turn = 32
lattice_name = /cs/dvlhome/apps/r/rayTrace_12GeV/dvl/fileio/data/2021-08-16_09:50:18/ITV0L01_SDL0R08
sddsmonitor_interval = 1.0
start_element = ITV0L01
emit = 5.702537524852556E-08
filter_min = 0
num_turns = 3
condition_dwell = 2
fsd_pv = ISD0I011G
name = ILD_x
end_pass = 1
launch_momentum = 6.72009126592131
corr2_momentum = 6.72009126592131
corr2_initial_bdl = -86
max_orbit = 1.5
corrector1 = MBH0L01V

iochdmag restoration failed

Log Number: 3893113Logbook(s): Tags: Body: restorelib 2.2.1 Target restore date was 2021-08-16 09:51:43 The output from the myRestore execution was as follows: iochdmag magnet_MAG@2021-08-16 09:51 The EPICS 'put' failed for the following MPSPEC.B2 MPSPEC.B3 MPSPEC.BDL MPSPEC.NSEL MSWEEP.B2 MSWEEP.B3 MSWEEP.BDL MSWEEP.NSEL 0(8) restored Pause: 2 second(s) magnet_HVAL@2021-08-16 09:51 The EPICS 'put' failed for the following MPSPEC.HVAL MSWEEP.HVAL 0(2) restored Pause: 2 second(s) magnet_LOOP@2021-08-16 09:51 The EPICS 'put' failed for th

rayTrace Data Collection: ITV0L01 to SDL0R08 - C laser to ILD

Log Number: 3893110Logbook(s): Body: username = dturner, hostname = opsl03, CSUE version = dvl

Data collection parameters:
points_per_turn = 32
lattice_name = /cs/dvlhome/apps/r/rayTrace_12GeV/dvl/fileio/data/2021-08-16_09:34:53/ITV0L01_SDL0R08
sddsmonitor_interval = 1.0
start_element = ITV0L01
emit = 5.702769778032801E-08
filter_min = 0
num_turns = 3
condition_dwell = 2
fsd_pv = ISD0I011G
name = ILD_x
end_pass = 1
launch_momentum = 6.72009126592131
corr2_momentum = 6.72009126592131
corr2_initial_bdl = -120.5
max_orbit = 1.5
corrector1 = MBH0L01H

MultiWire emittance measurement: MQD0L06 to IHA0R05 - y-plane values nonsensical

Log Number: 3893108Logbook(s): Body: username = dturner, hostname = opsl03, CSUE version = dvl,
login_key=pro, workspace=OPS

Data collection parameters:
config_file = /a/devdata/dvlfileio/fileio/m/MultiWire/config/F1-0/INJ_multiwire.xml
matchingTool_template = /cs/prohome/apps/q/qsUtility/pro/fileio/match_config/INJ_NL_match.xml
name = INJ_multiharp
end_pass = 1
start_element = MQD0L06
end_element = IHA0R05
mms_pv = MMSINJEGAIN
sigma_dp = 0.0
n_particles_per_bunch = 1024
start_pass = 1
p_central_mev = 102.688


Twiss parameters measured upstream of MQD0L06:

Quench bit mask on C100s?

Log Number: 3893107Logbook(s): Entry Makers: mmerzBody: 

Is this something we want done? (asking the (S)RF folks)
Is this the bit that would be masked? (see figure 1)
mmerz@opsl04 > ezgetc R1M5CNTL3b.I R1M5CNTL3r
R1M5CNTL3b.I -1 <- pressed mask button
R1M5CNTL3r 8
R1M5CNTL3r 264
R1M5CNTL3b.I 0 <- pressed unmask button
R1M5CNTL3r 8

Does someone have a script to do it lickety split?
Is there an ioc restore file it should be put into?

Pages