Recent Log Entries

COMMENT ON Injector Wien Filter - system upgrade (2020 SAD)

Log Number: 3865001Logbook(s): Body: 

Notes from T_Dela Cruz about the power supply used for the
Wien Filter Switcher chassis hi-potting:

-Using the Vacuum System's Hi-potronic DC power supply.
-Voltage was ramped up in 1kV increments and allowed it to
settle for 1 minute.
-Closely monitored the ampere meter on the front display for
current leakage starting at 15kV.
-Positive input channel was very stable up to 30kV, then it
overload faulted.
-Negative input channel did not overload fault at 30kV.

COMMENT ON East Arc 7 pass SLM Installation

Log Number: 3864990Logbook(s): Body: 

Interference issues have been resolved. Thank You Pete. Vac checks
has been completed and we are good to go. SLM16 will be installed
tomorrow and ready for S&A first thing. 24 & 32 are ready at this
time.They are both sitting about an inch low.

iocnl07rfcry restored

Log Number: 3864973Logbook(s): Tags: Body: restorelib 2.2.1 Target restore date was 2021-01-28 07:59:15 The output from the myRestore execution was as follows: iocnl07rfcry system@2021-01-28 07:59 2(2) restored Execute: /usr/csite/certified/bin/ced2Epics -ced ced -A -s -i iocnl07rfcry (success) Procedure return status: Success

iocnl07srfvac restored

Log Number: 3864974Logbook(s): Tags: Body: restorelib 2.2.1 Target restore date was 2021-01-28 07:59:17 The output from the myRestore execution was as follows: iocnl07srfvac system@2021-01-28 07:59 2(2) restored srfvac12@2021-01-28 07:59 50(50) restored Execute: /usr/csite/certified/bin/ced2Epics -ced ced -A -s -i iocnl07srfvac (success) Procedure return status: Success

Global 4ch BPM SuperCal Performed

Log Number: 3864970Logbook(s): Tags: Body: All BPMS on the following iocs passed supercal:
iocwa1
iocea2
iocea5
iocea4
iocea3
iocea6The following BPMS FAILED supercal: IPM7S01 (iocea1)
Scal Ratio Bad at Check GCV
Scal Ratio Bad at Check GCV
Scal Ratio Bad at Check GCV
Scal Ratio Bad at Check GCV

COMMENT ON East Arc 7 pass SLM Installation

Log Number: 3864968Logbook(s): Body: 

Stands set at SLM 24 & 32, Beam pipe set at these locations too.
SLM 16 is on hold temporarily, waiting on approval to remove beam
pipe by Vac.also need some BPM cables removed to allow access.

iocnl22rffcc1 restored

Log Number: 3864965Logbook(s): Tags: Body: restorelib 2.2.1 Target restore date was 2021-01-28 00:06:31 The output from the myRestore execution was as follows: iocnl22rffcc1 Rf12Fcc Pause: 60 second(s) Execute: /cs/opshome/burt/REBOOT/Rf12Fcc/DLOAD_ICAL.csh iocnl22rffcc1 (success) c100_rffcc@2021-01-28 00:06 34(34) restored Execute: burtwb -r 3 -f /cs/opshome/burt/REBOOT/Rf12Fcc/snap-ecal/iocnl22rffcc1-ecal.snap (success) Execute: burtwb -r 3 -f /cs/opshome/burt/REBOOT/Rf12Fcc/snap-exp/iocnl22rffcc1-exp.snap (success) Execute: /cs/opshome/burt/REBOOT/Rf12Fcc/GGTmyRestore.csh iocnl22

iocnl22rffcc1 restored

Log Number: 3864959Logbook(s): Tags: Body: restorelib 2.2.1 Target restore date was 2021-01-27 22:34:01 The output from the myRestore execution was as follows: iocnl22rffcc1 Rf12Fcc Pause: 60 second(s) Execute: /cs/opshome/burt/REBOOT/Rf12Fcc/DLOAD_ICAL.csh iocnl22rffcc1 (success) c100_rffcc@2021-01-27 22:34 34(34) restored Execute: burtwb -r 3 -f /cs/opshome/burt/REBOOT/Rf12Fcc/snap-ecal/iocnl22rffcc1-ecal.snap (success) Execute: burtwb -r 3 -f /cs/opshome/burt/REBOOT/Rf12Fcc/snap-exp/iocnl22rffcc1-exp.snap (success) Execute: /cs/opshome/burt/REBOOT/Rf12Fcc/GGTmyRestore.csh iocnl22

iocnl22rffcc1 restored

Log Number: 3864957Logbook(s): Tags: Body: restorelib 2.2.1 Target restore date was 2021-01-27 22:25:46 The output from the myRestore execution was as follows: iocnl22rffcc1 Rf12Fcc Pause: 60 second(s) Execute: /cs/opshome/burt/REBOOT/Rf12Fcc/DLOAD_ICAL.csh iocnl22rffcc1 (success) c100_rffcc@2021-01-27 22:25 34(34) restored Execute: burtwb -r 3 -f /cs/opshome/burt/REBOOT/Rf12Fcc/snap-ecal/iocnl22rffcc1-ecal.snap (success) Execute: burtwb -r 3 -f /cs/opshome/burt/REBOOT/Rf12Fcc/snap-exp/iocnl22rffcc1-exp.snap (success) Execute: /cs/opshome/burt/REBOOT/Rf12Fcc/GGTmyRestore.csh iocnl22

iocnl22rffcc1 restored

Log Number: 3864954Logbook(s): Tags: Body: restorelib 2.2.1 Target restore date was 2021-01-27 21:29:10 The output from the myRestore execution was as follows: iocnl22rffcc1 Rf12Fcc Pause: 60 second(s) Execute: /cs/opshome/burt/REBOOT/Rf12Fcc/DLOAD_ICAL.csh iocnl22rffcc1 (success) c100_rffcc@2021-01-27 21:29 34(34) restored Execute: burtwb -r 3 -f /cs/opshome/burt/REBOOT/Rf12Fcc/snap-ecal/iocnl22rffcc1-ecal.snap (success) Execute: burtwb -r 3 -f /cs/opshome/burt/REBOOT/Rf12Fcc/snap-exp/iocnl22rffcc1-exp.snap (success) Execute: /cs/opshome/burt/REBOOT/Rf12Fcc/GGTmyRestore.csh iocnl22

iocnl22rffcc1 restored

Log Number: 3864952Logbook(s): Tags: Body: restorelib 2.2.1 Target restore date was 2021-01-27 21:07:32 The output from the myRestore execution was as follows: iocnl22rffcc1 Rf12Fcc Pause: 60 second(s) Execute: /cs/opshome/burt/REBOOT/Rf12Fcc/DLOAD_ICAL.csh iocnl22rffcc1 (success) c100_rffcc@2021-01-27 21:07 34(34) restored Execute: burtwb -r 3 -f /cs/opshome/burt/REBOOT/Rf12Fcc/snap-ecal/iocnl22rffcc1-ecal.snap (success) Execute: burtwb -r 3 -f /cs/opshome/burt/REBOOT/Rf12Fcc/snap-exp/iocnl22rffcc1-exp.snap (success) Execute: /cs/opshome/burt/REBOOT/Rf12Fcc/GGTmyRestore.csh iocnl22

iocnl22rffcc1 restored

Log Number: 3864951Logbook(s): Tags: Body: restorelib 2.2.1 Target restore date was 2021-01-27 21:07:32 The output from the myRestore execution was as follows: iocnl22rffcc1 Rf12Fcc Pause: 60 second(s) Execute: /cs/opshome/burt/REBOOT/Rf12Fcc/DLOAD_ICAL.csh iocnl22rffcc1 (success) c100_rffcc@2021-01-27 21:07 34(34) restored Execute: burtwb -r 3 -f /cs/opshome/burt/REBOOT/Rf12Fcc/snap-ecal/iocnl22rffcc1-ecal.snap (success) Execute: burtwb -r 3 -f /cs/opshome/burt/REBOOT/Rf12Fcc/snap-exp/iocnl22rffcc1-exp.snap (success) Execute: /cs/opshome/burt/REBOOT/Rf12Fcc/GGTmyRestore.csh iocnl22

iocnl22rffcc1 restored

Log Number: 3864949Logbook(s): Tags: Body: restorelib 2.2.1 Target restore date was 2021-01-27 20:34:41 The output from the myRestore execution was as follows: iocnl22rffcc1 Rf12Fcc Pause: 60 second(s) Execute: /cs/opshome/burt/REBOOT/Rf12Fcc/DLOAD_ICAL.csh iocnl22rffcc1 (success) c100_rffcc@2021-01-27 20:34 34(34) restored Execute: burtwb -r 3 -f /cs/opshome/burt/REBOOT/Rf12Fcc/snap-ecal/iocnl22rffcc1-ecal.snap (success) Execute: burtwb -r 3 -f /cs/opshome/burt/REBOOT/Rf12Fcc/snap-exp/iocnl22rffcc1-exp.snap (success) Execute: /cs/opshome/burt/REBOOT/Rf12Fcc/GGTmyRestore.csh iocnl22

iocnl22rffcc1 restored

Log Number: 3864946Logbook(s): Tags: Body: restorelib 2.2.1 Target restore date was 2021-01-27 20:12:05 The output from the myRestore execution was as follows: iocnl22rffcc1 Rf12Fcc Pause: 60 second(s) Execute: /cs/opshome/burt/REBOOT/Rf12Fcc/DLOAD_ICAL.csh iocnl22rffcc1 (success) c100_rffcc@2021-01-27 20:12 34(34) restored Execute: burtwb -r 3 -f /cs/opshome/burt/REBOOT/Rf12Fcc/snap-ecal/iocnl22rffcc1-ecal.snap (success) Execute: burtwb -r 3 -f /cs/opshome/burt/REBOOT/Rf12Fcc/snap-exp/iocnl22rffcc1-exp.snap (success) Execute: /cs/opshome/burt/REBOOT/Rf12Fcc/GGTmyRestore.csh iocnl22

COMMENT ON Injector Upgrade - Phase 1 Installation (Gun to Chopper)

Log Number: 3864944Logbook(s): Body: 

Day #83, Week 17 Day 3, Wrap-Up:

AIPINJ --
* Wien filter HV polarity switcher chassis hi-potting begun
on Chassis 1 on bench. 3864799
* H-wien assembly begun using newly-developed teflon-
spacer method, improving electrode parallelism. picture
3864877
* Wien girder starting to be populated; pictures 3864877
* A1/A2 girder assembly nearly complete, two viewers
outstanding; design of these viewers had to be revisited;
now awaiting final parts for them; once added, whole
girder to S&A lab for pre-alignment.

iocse2 restoration failed

Log Number: 3864938Logbook(s): Tags: Body: restorelib 2.2.1 Target restore date was 2021-01-27 17:48:35 The output from the myRestore execution was as follows: iocse2 system@2021-01-27 17:48 2(2) restored seebpm@2021-01-27 17:48 The following are not available in EPICS IPM1L10.BCAL IPM1L10.BDIS IPM1L10.HOPD IPM1L10.HOPI IPM1L10.HPDI IPM1L10.LOPD IPM1L10.LPDI IPM1L10.MDEL IPM1L10.THET IPM1L10.XA1C IPM1L10.XALP IPM1L10.XEMN IPM1L10.XEMX IPM1L10.XGLD IPM1L10.XGOF IPM1L10.XGSC IPM1L10.XNIN IPM1L10.XNIR IPM1L10.XNIX IPM1L10.XPIN IPM1L10.XPIR IPM1L10.XPIX IPM1L10.XPOF IPM1L1

Pages